Shop

pilight only accepts paypal.

Do mind that we are not a commercial company, but volunteer developers that sell hardware to pay for our development expenses. Please keep this in mind when waiting for your orders.

In order to use pilight properly, additional hardware is needed. Using the right tools for the job will make your life a lot easier. The hardware we sell has been confirmed to be working with pilight by many users. This also allows you to use pilight on Windows and various NAS systems.

Please note that:

  1. Most of the hardware is easily available on the internet cheaper (on e.g. eBay). By ordering from pilight, the price difference will be considered a donation. This is thereby the easiest way to donate to the project.
  2. All shipments will be done in a regular paper envelopes except the PCB kits. All hardware will be put in a zip sealed bag. This means your order is not trackable. Order above €100 will be sent with a tracking number.
  3. I don't give any feedback about the ordering process if not explicitly requested. This means that if you pay with paypal you can assume that no news is good news. I will also not confirm the shipment. If you haven't received your order after 4 weeks you can mail me about its status. That's how long it can take (in exceptional cases) before the order to arrive.
  4. If there are problems just mail me and I will either resend the order or refund it. No questions asked.

Of the 1000+ orders, 99% never had issues. But also don't expect that buying from pilight will give you the same experience as with a regular shop. So please bear with us and have some more patience.

 

PCB Kits

In order to get started with pilight on any (supported) GPIO capable computer in the best way possible, you can buy one of the different PCB kits. These kits come in various types. Each increasing kit includes the parts of the preceding ones. The PCB kit is compatible with the Raspberry Pi and Hummingboard.

Raspberry Pi not included.

See the manual for  soldering instructions.

  • PCB Only
  • PCB Eights
  • - Voltage Regulator
  • - Headers
  • - Antenna
  • PCB Quarter
  • - IR
  • - P1 Meter
  • PCB Half
  • - Pre-Filter
  • PCB Full
  • - 433.92Mhz Sender / Receiver
  • PCB P1-Port (smart energy meter)
  • - Header
  • - P1 Meter

The presoldered options will always include the ATTiny socket to be able to hot swap the filter.

Price (select the correct area)

PCB Only
PCB Eights
PCB Eights (Pre Soldered)
PCB Quarter
PCB Quarter (Pre Soldered)
PCB Half
PCB Half (Pre Soldered)
PCB Full
PCB P1-Port (smart energy meter)
PCB P1-Port (smart energy meter; Pre-Soldered)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

Forum Topic

GPIO Full kit

In order to get started with pilight on any (supported) GPIO capable computer, you can buy the full GPIO kit including the filter and sender & receiver. The kit includes:

  • 1x 433.92Mhz Sender
  • 1x 433.92Mhz Receiver
  • 5x 1k resistor
  • 1x ATTiny85 flashed with the latest pilight firmware
  • 1x ATTiny85 socket
  • 1x Schematic

Price (select the correct area)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

pilight USB Nano Full kit

In order to get started with pilight on any USB capable computer, you can buy the full USB kit including the pilight USB Nano and sender & receiver. The pilight USB Nano firmware combines the hardware filter with a USB interface. The kit includes:

  • 1x 433.92Mhz Sender
  • 1x 433.92Mhz Receiver
  • 1x Arduino Nano (compatible) flashed with the latest pilight firmware

Price (select the correct area)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

Forum Topic

Filter kit

To properly work with pilight, a band-pass filter is recommended. This filter will greatly reduce the CPU usage of pilight making it more easy to run pilight next to other applications like Kodi. The kit includes:

  • 5x 1k resistor
  • 1x ATTiny85 flashed with the latest pilight firmware
  • 1x ATTiny85 socket
  • 1x Schematic

Price (select the correct area)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

Forum Topic

pilight USB Nano

To properly work with pilight on any computer, a pilight USB Nano interface is required. The pilight USB Nano firmware combines the hardware filter with a USB interface. The kit includes:

  • 1x Arduino Nano (compatible) flashed with the latest pilight firmware

Price (select the correct area)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

Forum Topic

Sender & Receiver kit

There are many 433.92MHz senders and receivers available but out of all we have tested only this one has been proven to work well. The kit includes:

  • 1x 433.92MHz Sender
  • 1x 433.92MHz Receiver

Price (select the correct area)

Shipment

Shipment will normally take place within a week. If this changes for some reason, it will be posted on this page.

Forum Topic

Published on